Remove the left console cover. (See Console Removal And Installation on Page 40-60-7.) Disconnect the wire harness (Item 1) [Figure 20-120-11]. Mark and remove the…

Remove the left console cover. (See Console Removal And Installation on Page 40-60-7.) Disconnect the wire harness (Item 1) [Figure 20-120-4]. Remove the lock (Item…

The following tools will be needed to do the procedure: MEL1355 – Hydraulic Test Kit Stop the engine. Open the right side cover. At the…

Clean all parts in solvent and dry with compressed air. Inspect all parts for wear or damage. Replace any worn or damaged parts. Always install…

Remove the right handle. (See Handle Removal And Installation on Page 20-110-2.) Clean the outside of the control lever before disassembly. Remove the boot (Item…

Remove the console cover. (See Console Cover Removal And Installation on Page 40-50-1.) Cut and remove the cable tie (Item 1) [Figure 20-110-12]. Disconnect the…

Remove the right console cover. (See Console Cover Removal And Installation on Page 40-50-1.) Cut and remove the cable tie (Item 1) [Figure 20-110-4]. Disconnect…

The following tools will be needed to do the procedure: MEL1355 – Hydraulic Test Kit Stop the engine. Open the right side cover. At the…

Clean the outside of the valve before disassembly. Remove the snap ring (Item 1) [Figure 20-100-3]. Remove the nylon washers (Item 1) [Figure 20-100-4]. Wrap…