Category: BobCat E35
Remove the right console cover. (See Console Cover Removal And Installation on Page 40-50-1.) Cut and remove the cable tie (Item 1). Disconnect the wire…
Remove the right console cover. (See Console Cover Removal And Installation on Page 40-50-1.) Cut and remove the cable tie (Item 1) [Figure 20-170-1]. Disconnect…
Drain the hydraulic reservoir. (See Removing And Replacing Hydraulic Fluid on Page 10-130-5.) Remove the hoses from the direct to tank valve and remove valve…
Open the right side cover. Open the tailgate. Remove the hydraulic reservoir. (See Removal And Installation on Page 20-140-1.) Remove the top hose (Item 1)…
Drain the reservoir. (See Removing And Replacing Hydraulic Fluid on Page 10-130-5.) Remove the right upper structure cover. (See Removal And Installation on Page 40-80-1.)…
Drain the hydraulic reservoir. (See Removing And Replacing Hydraulic Fluid on Page 10-130-5.) Remove the right upper structure cover. (See Removal And Installation on Page…
Clean all parts in solvent and dry with compressed air. Inspect all parts for wear or damage. Replace any worn or damaged parts. Always install…
Remove the left handle. (See Handle Removal And Installation on Page 20-120-2.) Clean the outside of the control lever before disassembly. Remove the boot (Item…