Inspect the quick coupler for wear or damage. Inspect the the hooks (Item 1) and coupler locking shaft (Item 2) [Figure 40-211-1] (on the attachment)…

Install the latch (Item 1) [Figure 40-210-12]. Install the two roll pins (Item 1) [Figure 40-210-13]. Drive the roll pins inwards until the roll pins…

The two springs (Item 1) [Figure 40-210-7] have different style of end hooks. The spring hook (Item 2) [Figure 40-210-7] are full circle hooks. The…

Remove the attachment. The quick coupler must be in the latched position [Figure 40-210-2] for disassembly. Inspect the quick coupler to make sure the latch…

Inspect the quick coupler for wear or damage. Inspect the quick locking shaft (Item 1) and the hooks (Item 2) [Figure 40-210-1] (on the attachment)…

Clean all parts in solvent and dry with compressed air. Inspect the parts for wear or damage. Replace any worn or damaged parts. Always install…

Remove the bolt (Item 1) and nut. Remove the cover (Item 2) [Figure 40-201-9]. Remove the bolt (Item 1) [Figure 40-201-10], washer and spacer. Remove…