Loosen the two nuts and two bolts (Item 1) [Figure 40-220-6] and adjust the latch. Loosen the two nuts (Item 1) [Figure 40-220-6] and adjust…

Remove the nut, bolt and clamp (Item 1). Remove the bolts and nuts (Item 2) and remove the latch (Item 3) [Figure 40-220-3]. Remove the…

Open the right side cover. Remove the clip (Item 1). Support the cover and separate the support (Item 2) [Figure 40-220-1]. Support the cover and…

Install bushing (Item 1), O-ring (Item 2) and bushing (Item 3) [Figure 40-211-24] in both locking pin bores. Install reversing lever (Item 1), pin (Item…

Remove the eight bolts (Item 1) and cover (Item 2) [Figure 40-211-10]. Remove all sealant (Item 1) [Figure 40-211-11] from the housing and cover. NOTE:…

Remove the two bolts (Item 1) [Figure 40-211-8] and lock washers. Turn the threaded spindle (Item 1) counterclockwise until the locking mechanism (Item 2) [Figure…

Place the coupler on the ground with the hooks (Item 1) [Figure 40-211-5] facing towards the excavator. Align the arm and bucket link with the…

Remove the four nuts (Items 1). Remove the two bolts (Item 2) [Figure 40-211-2]. Remove the two connecting pins (Item 1) and O-rings (Item 2)…