The two springs (Item 1) [Figure 40-210-7] have different style of end hooks.
The spring hook (Item 2) [Figure 40-210-7] are full circle hooks.
The spring hook (Item 3) [Figure 40-210-7] are partial circle hooks.
The spring ends must be positioned as shown when assembled.
Remove the spring end hook (Item 1) [Figure 40-210-8] from the quick coupler.
Remove the opposite end of the two springs (Item 1) [Figure 40-210-9].
Remove the two roll pins (Item 1) [Figure 40-210-10].
Drive the roll pins inwards to remove.
Remove the latch (Item 1) [Figure 40-210-11].
