On SJC equipped loaders, the speed sensor [Figure 60-80-1] is used by the loader’s controllers to sense if the drive motor is rotating. The end…

Raise the lift arms and install an approved lift arm support device. (See Installing on Page 10-20-1.) Raise the operator cab. (See Raising on Page…

The drive controller is only on loaders equipped with the SJC option. This controller processes information for the drive functions. The drive controller is located…

Lift and block the rear of the loader. (See Procedure on Page 10-10-1.) Raise the lift arms and install an approved lift arm support device.…

The Bobcat Controller (ACS) is part of the Advanced Control System (ACS) which is a selectable foot/hand control system. Electrical actuators shift the spools on…

Lift and block the rear of the loader. (See Procedure on Page 10-10-1.) Raise the lift arms and install an approved lift arm support device.…

The main controller provides information to all other controllers. All loaders have a main controller. The main controller is located behind the access panel near…