The Bobcat Controller (ACS) is part of the Advanced Control System (ACS) which is a selectable foot/hand control system. Electrical actuators shift the spools on the hydraulic control valve.
The ACS system allows the operator to quickly switch between foot and hand control modes.
The ACS controller is housed in a grey colored plastic shell with black potting. The ACS controller communicates with the Main Bobcat Controller by CAN communication wires. The ACS controller is capable of receiving upgrades to the software.
Control Handle (Item 1) [Figure 60-71-1].
Handle sensor (Item 2) [Figure 60-71-1].
NOTE: The calibration procedure must be followed when replacing handle sensor, foot pedal sensor, actuator or ACS Controller. (See CALIBRATION on Page 60-160-1.)
Foot control/sensor assembly (Item 1) [Figure 60-71-2].
Foot sensor (Item 2) [Figure 60-71-2].
NOTE: The calibration procedure must be followed when replacing handle sensor, foot pedal sensor, actuator or ACS Controller. (See CALIBRATION on Page 60-160-1.)
Control Valve Actuators (Item 1) [Figure 60-71-3].
NOTE: The calibration procedure must be followed when replacing handle sensor, foot pedal
sensor, actuator or ACS Controller. (See CALIBRATION on Page 60-160-1.)
ACS Controller (Item 1) [Figure 60-71-4].
NOTE: The calibration procedure must be followed when replacing handle sensor, foot pedal
sensor, actuator or ACS Controller. (See CALIBRATION on Page 60-160-1.)
ACS error indicator (Item 1) [Figure 60-71-5].
NOTE: The ACS icon will illuminate when an error occurs. The error is stored as a service code. (See Service Codes List on Page 60-90-2.)