Remove the screws (Items 1) [Figure 60-60-6] from the light cover. NOTE: The wires for the switch will hold the light cover. Do not pull…

Remove the bulb assembly (Items 1 & 2) from the light housing (Item 3) [Figure 60-60-4] by turning bulb assembly a 1/4 turn. Using care…

Open the rear door. Disconnect the negative(-) cable from the battery. (See Removal And Installation on Page 60-20-1.) Remove the light housing (Item 1) [Figure…

Remove the two mounting bolts (Item 1) [Figure 60-50-26]. Installation: Be careful to not overtighten the front accessory panel mounting bolts to prevent damage to…

Remove the left side instrument panel. Remove the retaining nut (Item 1) [Figure 60-50-25] from the loader alarm. Remove the alarm from the loader instrument…

Disconnect the key switch wiring harness (Item 1) [Figure 60-50-22] from the back of the control panel. Remove the ignition key (Item 1) from the…

Remove the left side instrument panel. Remove the two light bulb covers (Item 1) [Figure 60-50-19] from the back of the instrument panel. With a…

Remove the three mounting bolts (Item 1) [Figure 60-50-8]. Installation: Be careful to not overtighten the instrument panel mounting bolts to prevent stripping of the…

NOTE: Parking Brake (Item 13) [Figure OI-7] is standard on all loaders.  

The right instrument panel shown [Figure 60-50-3] is the Keyless Panel. 1. Display Screen: The Display Screen is where all system setup, monitoring, troubleshooting, and…