Fasten the seat belt, disengage the parking brake button, press the PRESS TO OPERATE LOADER Button (Item 1) [Figure 60-120-13] and raise the Seat Bar…

Raise the loader operator cab. (See Raising on Page 10-30-2.) NOTE: The loader control panel and linkage crossbar have been removed for clarity purpose only.…

The following troubleshooting chart is provided for assistance in locating and correcting BICS system problems. It is recommended that these procedures be done by authorized…

Use Sensor Testers (MEL1428) and seat bar sensor tester adapter (MEL1567) for the following procedure: Connect the seat bar sensor tester adapter MEL1567 to the…

Remove the seat bar (Item 1) [Figure 60-110-5] from the loader. (See Removal And Installation on Page 50-10-1.) Remove the mounting bolt (Item 1) from…

. Use Sensor Tester (MEL1428) and seat bar sensor tester adapter (MEL1567) for the following procedure: Connect the seat bar adapter sensor leads (MEL1567) to…

The following troubleshooting chart is provided for assistance in locating and correcting BICS system problems. It is recommended that these procedures be done by authorized…

The following chart shows the effects which can happen to the loader, and the probable causes when the BICS Instrument Panel lights are off. See…

The following troubleshooting guide is provided for assistance in locating and correcting BICS system problems. It is recommended that these procedures be done by authorized…

9. Sit in operator’s seat and fasten seat belt. Lower seat bar, start engine and press the PRESS TO OPERATE LOADER button. 10. Raise lift…