9. Sit in operator’s seat and fasten seat belt. Lower seat bar, start engine and press the PRESS TO OPERATE LOADER button.
10. Raise lift arms about 6 feet (2 meters) off the ground.
11. Turn key OFF (Key Switch Panel), press STOP button (Keyless Panel), and wait for the engine to come to a complete stop.
12. Turn key ON (Key Switch Panel), press RUN/ENTER button (Keyless Panel). Press the PRESS TO OPERATE LOADER button, move hand control or joystick to lower the lift arms. Lift arms should not lower.
13. Move the control (foot pedal, hand control or joystick) to tilt the bucket (or attachment) forward. The bucket (or attachment) should not tilt forward.
