Fasten the seat belt, disengage the parking brake button, press the PRESS TO OPERATE LOADER Button (Item 1) [Figure 60-120-13] and raise the Seat Bar fully. Move the steering levers slowly forward and backward. The TRACTION lock (Item 4) [Figure 60-120-13] should be engaged. Lower the Seat Bar. Press the PRESS TO OPERATE LOADER Button (Item 1) [Figure 60-120-13].
Engage the parking brake pedal and move the steering levers slowly forward and backward. The TRACTION lock should be engaged.
NOTE: The TRACTION light on the left instrument panel will remain OFF until the engine is started, the PRESS TO OPERATE LOADER Button is pressed and the parking brake is disengaged.
Check the wire connections at the engine flywheel RPM speed sensor (Item 1) [Figure 60-120-14].
NOTE: When the Traction Lock Override Button is activated, the Traction Lock Override Control System will NOT engage the Traction Lock if the engine stops.
See Adjusting on Page 60-170-1 for Flywheel RPM sensor adjustment.
Fasten the seat belt, disengage the parking brake pedal, press the green PRESS TO OPERATE Button and raise the Seat Bar fully. Move the control levers slowly forward and backward. The Traction lock should be engaged. Lower the Seat Bar. Press the green PRESS TO OPERATE Button.
Engage the parking brake pedal and move the control levers slowly forward and backward. The Traction lock should be engaged.
