Raise the operator cab. (See Raising on Page 10-30-2.) Remove the operator seat. (See Removal And Installation on Page 50-31-1.) Remove the seat shock mounting…

Pull the seat back adjustment lever (Item 1) [Figure 50-31-11] and tilt the seat back all the way forward. Remove the two mounting screws (Item…

Press the two buttons (Item 1) [Figure 50-31-7] & [Figure 50-31-8] and lift the seat cushion. Remove the cushion (Item 2) [Figure 50-31-8] from the…

Remove the nut (Item 1) [Figure 50-31-6] from the seat belt mount. Remove the seat belt. Installation: Tighten the mounting nuts to 58 – 62…

Raise the operator cab. (See Raising on Page 10-30-2.) Remove the operator seat. (See Removal And Installation on Page 50-31-1.) Remove the two slide rail…

Raise the operator cab. (See Raising on Page 10-30-2.) Remove the four seat mounting nuts (Item 1) [Figure 50-31-1] and washers from the operator seat…

Raise the operator cab. (See Raising on Page 10-30-2.) Locate the seat belt bolts under seat pan insulation (Items 1 & 2) [Figure 50-30-3] and…

Remove the operator cab gas cylinder(s). (See Gas Cylinder Removal And Installation on Page 50-20-1.) Remove the heater unit from the cab (if equipped). (See…

Remove the clevis (Item 1) and washer (Item 2) [Figure 50-20-9] from the end of the gas cylinder. Remove the gas cylinder from the outer…

Remove the operator cab stop (Item 1) (both sides) [Figure 50-20-1]. Remove the cab nut and holddown plate (Item 1) [Figure 50-20-2] (both sides). Installation:…