Disconnect the wire harness connector (Item 1) [Figure 70-40-1] from the air cleaner sensor on the air cleaner.
Loosen the hose clamp (Item 1) [Figure 70-40-2] on the air cleaner hose.
Loosen the clamp (Item 2) [Figure 70-40-2] from the hose on the engine manifold.
Remove the lower mounting bolt (Item 1) and engine harness mounting bracket (Item 2) [Figure 70-40-3] from the air cleaner.
Remove the two upper mounting bolts (Item 3) [Figure 70-40-2] from the top mount of the air cleaner.
Installation: Tighten the three mounting bolts to 15 – 20 ft.-lb. (20 – 27 Nโขm) torque.
Remove the air cleaner from the engine compartment.
Reverse the removal procedure to install the air cleaner.
