BOBCAT S130 – MUFFLER – Removal And Installation

Stop the engine and open the rear door.

Remove the rear grill. (See Removal And Installation on Page 50-60-1.)

Remove the exhaust pipe clamp (Item 1) from the muffler (Item 2) [Figure 70-30-1].

Disconnect the exhaust pipe from the muffler.

Remove the left side mounting bolt (Item 3) [Figure 70-30-1] from the muffler.

Remove the right side mounting bolt (Item 1) [Figure 70-30-2] from the muffler.

Installation: Tighten the muffler mounting bolts to 25 – 28 ft.-lb. (34 – 38 Nโ€ขm) torque.

Remove the muffler from the loader.

Reverse the removal procedure to install the engine muffler.