Open the tailgate.
Evacuate the A/C system. (See Reclamation And Charging With Recovery / Charging Unit on Page 70-40-3.)
Open the right side cover.
Mark the A/C hoses for proper installation.
Remove the hose (Item 1) [Figure 70-60-1] from the condenser.
Cap the hose and plug the fitting on the condenser.
Installation: Tighten the hose (Item 1) [Figure 70-60-1] to 15 – 17 Nโขm (11 – 13 ft-lb) torque.
Remove the hose (Item 1) [Figure 70-60-2] from the condenser.
Cap the hose and plug the fitting on the condenser.
Installation: Tighten the hose (Item 1) [Figure 70-60-2] to 20 – 27 Nโขm (15 – 20 ft-lb) torque.
Loosen the clamp (Item 2) [Figure 70-60-2].
Remove the tie-strap (Item 1) [Figure 70-60-3].
Remove the clips (Item 2) [Figure 70-60-3] and remove the rod.
Remove the condenser from the excavator.
