The hydrostatic transmission, shown in Fig. 6.28, is operating under a constant load. Speed is set by the command voltage at 1000 rpm. The feedback…
Tag: Hydrostatic Transmission
A configuration where all four wheels are powered is shown in Fig. 6.18. A single pump provides flow to four motors. This machine can be…
As previously mentioned, it is often necessary to provide a road speed, so the machine can be moved on the highway between job sites. (Generally,…
Wheel motors, mounted at both rear wheels (Fig. 6.12), is a variation of the configuration shown in Fig. 6.11. This arrangement eliminates the universal joint…