The following tools will be needed to do the procedure: MEL1355 – Hydraulic Test Kit Stop the engine. Open the right side cover. At the…

Clean the outside of the valve before disassembly. Remove the snap ring (Item 1) [Figure 20-100-3]. Remove the nylon washers (Item 1) [Figure 20-100-4]. Wrap…

Remove the tool box. (See Removal And Installation on Page 40-230-1.) Mark all hydraulic hoses for proper installation. Remove the eight hydraulic hoses from the…

Remove the thrust plate (Item 1) and sun gear (Item 2) [Figure 20-91-2]. Remove the planetary gears (Item 1) [Figure 20-91-3] and roller bearings. Remove…

Remove the swing motor. (See Removal And Installation on Page 20-90-1.) Remove the six bolts (Item 1) [Figure 20-91-1] and remove the carrier. Installation: Tighten…

Remove the bolts (Item 1) and remove the counter balance valve (Item 2) [Figure 20-90-5]. Remove the O-rings (Item 1) [Figure 20-90-6]. Remove the plugs…

Drain the hydraulic reservoir. (See Removing And Replacing Hydraulic Fluid on Page 10-130-5.) Remove the floor mat. (See Removal And Installation on Page 40-110-1.) Remove…