Posted on by

BOBCAT S130 – HYDRAULIC CONTROL VALVE (ACS) OR (SJC) – Plug Removal And Installation

At the top side of the control valve, remove the plug (Item 1) [Figure 20-41-46].

Installation: Always use new O-rings (Item 1) [Figure 20-41-47]. Tighten to 40 ft.-lb. (54 Nโ€ขm) torque.

At the bottom side of the control valve remove the plug (Item 1) [Figure 20-41-48].

Installation: Always use new O-rings (Item 1) [Figure 20-41-49]. Tighten to 40 ft.-lb. (54 Nโ€ขm) torque.

 

Published by Jack