Inspect for damaged or missing back-up alarm decal (Item 1) [Figure 60-210-1]. Replace if required.
Sit in the seat and fasten the seat belt. Engage the parking brake. Pull the seat bar all the way down. Start the engine. Press the PRESS TO OPERATE LOADER button. Disengage the parking brake.
Move both steering levers or joystick(s) in the reverse position. The back-up alarm must sound when all wheels or both tracks are moving in reverse.
The back-up alarm is located on the inside of the rear door.
Inspect the back-up alarm electrical connections (Item 1) [Figure 60-210-2], wire harness (Item 2) [Figure 60-210-2] and back-up alarm switches (if equipped) (Item 2) [Figure 60-210-3] for tightness and damage. Repair or replace any damaged components.
If the back-up alarm switches require adjustment, (See Adjusting Switch Position on Page 60-210-2.)
