Drain the hydraulic reservoir. (See Removing And Replacing Hydraulic Fluid on Page 10-130-5.)
Remove the floor mat. (See Removal And Installation on Page 40-110-1.)
Remove the tool box. (See Removal And Installation on Page 40-230-1.)
Mark and remove the crossport relief valves (Item 1) [Figure 20-32-4].
NOTE: Install the valves in the original location.
Cross Port Relief Valve Disassembly And Assembly
Remove the cap (Item 1) [Figure 20-32-5].
Remove the spool (Item 1), spring (Item 2) and poppet (Item 3). Remove the O-rings (Item 4) and back-up rings (Item 5) [Figure 20-32-6].
NOTE: Shims (Item 6) [Figure 20-32-6] may be installed on the spool. Always install the same number of shims that were removed.
