BobCat E35 – MUFFLER – Removal And Installation

Open the tailgate.

Remove the four bolts (Item 1), fuel cap (Item 2) and side cover (Item 3) [Figure 60-30-1].
Reinstall the fuel cap (Item 2) [Figure 60-30-1].

NOTE: Reinstall the fuel cap to prevent any contamination from entering the fuel tank.

Remove the clamp (Item 1) [Figure 60-30-2].

Remove the bolt (Item 1) [Figure 60-30-4] and remove the tail pipe.

Remove the two bolts (Item 1) [Figure 60-30-4] and washers.

Installation: Tighten the bolts to 54 – 61 Nโ€ขm (40 – 45 ft-lb) torque.

Remove the two bolts (Item 1) [Figure 60-30-5].

Remove the muffler.