This allows the operator to Unlock the password feature so that a password does not need to be used every time you start the engine.
Perform Password Entry (See Password Entry (For Starting And Operating The Machine) on Page 50-90-1.) (the engine can be started or stopped). The password entry can be performed with the engine off or with the engine running.
Press the Lock / Unlock button (Item 1). The data display screen (Item 5) [Figure 50-90-2] will continuously alternate from UnLoc to CodE for 1 second periods.
Perform Password Entry again.
UnLoc will appear in the data display screen (Item 5), the Unlocked Icon (Item 2) will appear in the Icon Display Area (Item 3) [Figure 50-90-2] and there will be two short beeps.
To start an Unlocked system, press the ENTER CODE button and press the START button.
When you stop the engine with the system unlocked, you will hear one long beep every 3 seconds for 15 seconds.
To lock the system again, press the Lock / Unlock button (Item 1) [Figure 50-90-2] and enter the password during the 15 second period.
