Remove the counterweight. (See Removal And Installation on Page 40-90-1.)
Remove the alternator belt. (See Belt Replacement on Page 50-30-1.)
Evacuate the A/C system. (See Reclamation And Charging With Recovery / Charging Unit on Page 70-40-3.)
Cut and remove the cable ties (Item 1) [Figure 70-50-1].
Remove the hoses (Item 1 and 2) [Figure 70-50-2].
Installation: Tighten the compressor hose (Item 1) to 28 – 36 Nโขm (21 – 27 ft-lb) torque. Tighten the compressor hose (Item 2) [Figure 70-50-2] to 20 – 27 Nโขm (15 – 20 ft-lb) torque.
Disconnect the wire harness (Item 1) [Figure 70-50-3].
Remove the bolt (Item 1) [Figure 70-50-4].
Remove the bolt (Item 1) [Figure 70-50-5].
Remove the bolts (Item 1) [Figure 70-50-6].
Install a lifting strap (Item 1) [Figure 70-50-7] on the alternator / compressor bracket.
Loosen the left engine mount bolt (Item 1) [Figure 70-50-8].
Loosen the right engine mount bolt (Item 1) [Figure 70-50-9].
Raise the engine and remove the compressor (Item 1) [Figure 70-50-10].
The compressor is not serviceable and must be replaced as an assembly.
