Remove the nut (Item 1) [Figure 20-40-116] from both solenoids.
Installation: Tighten the nut to 8-12 ft.-lbs. (11-16 Nm) torque.
Remove the coil (Item 1) [Figure 20-40-117].
Remove the solenoid valve (Item 2) [Figure 20-40-117].
Installation: Tighten valve to 8-12 ft.-lbs. (11-16 Nm) torque.
Remove the O-rings (Item 1) [Figure 20-40-118] from the solenoid valves.
