BobCat 753 – ADVANCED CONTROL SYSTEM (ACS) SELECTABLE HAND/FOOT CONTROL – Foot Sensor Connector

The wire connector (Item 1) [Figure 60-123-49] can be removed from the sensor wires, use the following procedure.

Remove the wedge (Item 1) [Figure 60-123-50] from the connector.

With a pointed tool, lift the tab (Item 1) [Figure 60-123-51] and pull the wire from the connector.

Installation: Install the wires into the connector as listed below [Figure 60-123-51]:
1 – Terminal – Red
2 – Terminal – Black
3 – Terminal – Green