Remove the two bolts (Item 1) [Figure 60-123-52] from the foot sensor shield.
Installation: Tighten the bolts to 80-90 in.-lbs. (9,0-10,2 Nm) torque.
Disconnect the foot lock solenoid connector (Item 1) [Figure 60-123-53] from the harness.
Remove foot lock solenoid (Item 2) [Figure 60-123-53].
Installation: Apply a drop of oil on the solenoid threads and tighten the solenoid to 35-40 ft.-lbs. (47-54 Nm) lubed torque.
Check the O-ring (Item 1) [Figure 60-123-54] for damage. Replace as necessary.