BobCat 753 – ADVANCED CONTROL SYSTEM (ACS) SELECTABLE HAND/FOOT CONTROL – Components Identification

The Advanced Control System (ACS) is a selectable foot/hand control system.

The ACS system allows the operator to quickly switch between foot and hand control modes.

Control Handle (Item 1) [Figure 60-123-1].

Handle sensor (Item 2) [Figure 60-123-1].

NOTE: The calibration procedure must be followed when replacing handle sensor, foot pedal sensor, actuator or ACS Controller. (See Calibration Of The ACS System on Page 60-123-14.)

Foot control/sensor assembly (Item 1) [Figure 60-123-2].

Foot sensor (Item 2) [Figure 60-123-2].

NOTE: The calibration procedure must be followed when replacing handle sensor, foot pedal sensor, actuator or ACS Controller. (See Calibration Of The ACS System on Page 60-123-14.)

Control Valve Actuators (Item 1)[Figure 60-123-3].

NOTE: The calibration procedure must be followed when replacing handle sensor, foot pedal sensor, actuator or ACS Controller. (See Calibration Of The ACS System on Page 60-123-14.)

ACS Controller (Item 1) [Figure 60-123-4].

NOTE: The calibration procedure must be followed when replacing handle sensor, foot pedal sensor, actuator or ACS Controller. (See Calibration Of The ACS System on Page 60-123-14.)

ACS error indicator (Item 1) [Figure 60-123-5].

NOTE: The ACS icon will illuminate when an error occurs. The error is stored as a service code. (See DIAGNOSTICS on Page 60-80-1.)