The current setting can be saved by pressing and holding the PRESS TO OPERATE LOADER button (Item 1) for three seconds. [SEt] (Item 3) will appear in the display (item 2) [Figure 60-161-3] and the machine will disengage from steering drift compensation.
OR
Press the PRESS TO OPERATE LOADER button to disengage from steering drift compensation without saving the current setting. [donE] (Item 4) will appear in the display (Item 2) [Figure 60-161-3] and the upper left and upper right buttons on the left joystick will no longer make changes to steering drift compensation. The current settings will remain in effect until the STOP button is pressed (Keyless Panel) or the key is turned OFF (Key Switch Panel). The machine will revert back to the last saved settings the next time it is started.
