Loosen the striker assembly mount bolts (Item 1) [Figure 50-70-6].
Align the striker assembly in the center of the mounting holes.
NOTE: Tighten the striker assembly, top mount bolt only, until it will hold the striker assembly in the center of the mounting slots.
Close the rear door. (This will align the striker assembly to the correct position.)
Open the door.
Installation: Tighten the mounting bolts (Item 1) [Figure 50-70-6] to 90 – 100 ft.-lb. (125 – 135 Nโขm) torque.
Close the rear door.