Remove filter outlet hose (Item 1) and inlet hose (Item 2) [Figure 20-80-5].
Disconnect the electrical connector (Item 3) [Figure 20-80-5] from the charge pressure sender.
Disconnect the charge pressure tubeline (Item 1) [Figure 20-80-6] that connects to the control valve.
Disconnect the electrical connector (Item 2) [Figure 20-80-6] from the differential pressure sensor.
Remove the four mounting bolts (Item 1) [Figure 20-80-7].
Installation: Tighten the mount bolts to 25 ft.-lb. (34Nโขm) torque.
Remove filter assembly from the loader.
Charge filter assembly components:
1. Filter
2. Filter head
3. Differential pressure switch
4. Charge pressure sensor
