Remove the male coupler (Item 1) [Figure 20-140-2] & [Figure 20-140-3].
Installation: Tighten the male coupler (Item 1) [Figure 20-140-2] & [Figure 20-140-3] to 59 ft.-lb. (80 Nโขm)
Remove the drain coupler (Item 2) [Figure 20-140-2] & [Figure 20-140-3].
Installation: Tighten the drain coupler (Item 2) [Figure 20-140-2] & [Figure 20-140-3] to 37 ft.-lb. (50 Nโขm)
Remove the female coupler (Item 3) [Figure 20-140-2] & [Figure 20-140-3].
Installation: Tighten the female coupler (Item 3) [Figure 20-140-2] & [Figure 20-140-3] to 59 ft.-lb. (80 Nโขm)
Remove the fittings (Item 4), check the O-rings (Item 5) [Figure 20-140-3] and replace as needed.
Remove the springs (Item 6) [Figure 20-140-3].
Check the O-ring (Item 1) [Figure 20-140-4] for damage and replace as needed.
Press center of male couplers down and check the O-ring (Item 1) [Figure 20-140-5] for damage and replace as needed.
Check the O-rings (Item 1) backup O-rings (Item 2) [Figure 20-140-6] for damage and replace as needed.
Check the O-rings (Item 1) and backup O-rings (Item 2) [Figure 20-140-7] for damage and replace as needed.
