Remove the case drain filter(s) from the machine. (See Removing And Replacing Case Drain Filters on Page 10-120-4.)
Remove the filter housing nut (Item 1) from the filter housing (Item 2) [Figure 30-70-1].
Remove the packing (Item 1) and O-ring (Item 2) [Figure 30-70-2] from the filter housing nut.
Remove the filter element and spring assembly (Item 1) [Figure 30-70-3]
NOTE: Remember the orientation of the filter element and spring assembly for correct assembly.
The larger taper spring (Item 1) slides over the end of the filter element (Item 2) and the smaller tapered spring (Item 3) [Figure 30-70-4] slides into the filter element.
