Install the bushings (Item 1) and seals (Item 2) [Figure 40-200-10] (both sides).
Install the O-ring (Item 1) [Figure 40-200-11] (both sides). Use grease to hold the O-rings in place.
Install the link (Item 1) [Figure 40-200-12].
Install the pin (Item 1) [Figure 40-200-13].
Install the bolt (Item 1) and nuts (Item 2) [Figure 40-200-14].
Roll the two seals (Item 1) [Figure 40-200-15] into the groove between the link and the attachment.
