Disconnect the wire harness (Item 1) [Figure 50-120-1].
Disconnect the washer hose (Item 1). Remove the nut (Item 2) and wiper arm (Item 3) [Figure 50-120-2].
Remove the screw (Item 1). Remove the nut (Item 2) [Figure 50-120-3].
Remove the plate (Item 1) [Figure 50-120-4] and gasket.
Pry up on and remove the cover (Item 1) [Figure 50-120-5].
Remove the bolts (Item 1) [Figure 50-120-6] and remove the wiper motor from the plate.
