BobCat E35 – REGULAR MAINTENANCE – Fan Belt Replacement – Installation

Install the new fan belt.

Position the belt over the water pump pulley and next to the engine block and align the lower part of the belt to the crankshaft pulley.

Using the pry bar (Item 1) [Figure 70-20-7] to rotate the engine and push the belt on the pulley using the second pry bar (Item 1) [Figure 70-20-11].

Install the flywheel plug (Item 1) [Figure 70-20-6].

Install the alternator belt. (See Belt Replacement on Page 50-30-1.)

Install the fan guard (Item 1) [Figure 70-20-5].

Close the tailgate.