Remove the two bolts (Item 1) and gear pump (Item 2)[Figure 20-50-35].
Installation: Tighten the bolts to 26 – 32 Nโขm (19 – 24 ft-lb) torque.
Remove the O-rings (Item 1) [Figure 20-50-36].
Remove the two bolts (Item 1) and cover (Item 2) [Figure 20-50-37].
Installation: Tighten the bolts to 26 – 32 Nโขm (19 – 24 ft-lb) torque.
Remove the thrust plate (Item 1) [Figure 20-50-38].
Remove the O-rings (Item 1) [Figure 20-50-39].
Inspect the bushings (Item 1) [Figure 20-50-40] for wear or damage.
NOTE: The bushings are not serviceable. If the bushings are worn or damaged, replace the cover assembly (Item 2) [Figure 20-50-40].
Remove the gears (Item 1) [Figure 20-50-41].
Inspect the bushings (Item 1) [Figure 20-50-42] for wear or damage.
NOTE: The bushings are not serviceable. if the bushings are worn or damaged, replace the housing assembly (Item 2) [Figure 20-50-42].
