Remove the engine coolant. (See Removing And Replacing Coolant on Page 10-100-3.)
Remove the HVAC Duct. (See Removal And Installation on Page 70-150-1.)
Disconnect the wire harness (Item 1) [Figure 70-120-1].
Cut and remove the cable tie (Item 1). Remove the clips (Item 2) [Figure 70-120-2].
Remove the center floor panel. Remove the two screws and remove the bracket (Item 1) [Figure 70-120-3].
Disconnect the heater hoses (Item 1) [Figure 70-120-4].
Remove the coil (Item 1) [Figure 70-120-5].
