BobCat E35 – ALTERNATOR – Belt Replacement

Removal
Stop the engine and open the tailgate. (See Opening And Closing on Page 10-50-1.)

Loosen the bolt (Item 1) [Figure 50-30-1] and the lower alternator mounting bolt and nut (not shown).
Use a pry bar to take the pressure off of the bolt (Item 1) [Figure 50-30-1] and remove the top bolt.
Remove and replace the alternator belt.

Installation
Use the pry bar to position the alternator and install the bolt (Item 1) [Figure 50-30-1].
Tighten the top and bottom alternator mounting bolts. Close the tailgate.