Open the rear door and raise the rear grill [Figure 50-60-4].
Remove the gas cylinder rod end (Item 1) [Figure 50-60-5] from the rear grill. (See Gas Cylinder Removal And
Installation on Page 50-60-1.)
Lower the rear grill [Figure 50-60-6].
Remove the retainer pin (Item 1) [Figure 50-60-7] from the pivot pin (both sides).
Remove the pivot pin (Item 2) [Figure 50-60-7] (both sides).
Lift the rear grill from the loader.
Reverse the removal procedure to install a new grill.
