Raise the operator cab. (See Raising The Operator Cab on Page 10-30-1.)
Remove the operator seat. (See Removal And Installation on Page 50-31-1.)
Remove the seat shock retaining pin (Item 1) [Figure 50-31-12] & [Figure 50-31-13] (Both ends.)
Remove the seat shock (Item 2) [Figure 50-31-12] & [Figure 50-31-13].
NOTE: The seat block mounting studs (Item 1) [Figure 50-31-14] are replaceable.
Reverse the removal procedure to install the operator seat shock.
