Open the rear door and raise the rear grill.
Remove the exhaust pipe clamp (Item 1) from the muffler (Item 2) [Figure 70-30-1].
Disconnect the exhaust pipe from the muffler.
Remove the left side mounting bolt (Item 3) [Figure 70-30-1] from the muffler.
Remove the right side mounting bolt (Item 1) [Figure 70-30-2] from the muffler.
Installation: Tighten the muffler mounting bolts to 25-28 ft.-lbs. (34-38 Nm) torque.
Remove the muffler from the loader.
Reverse the removal procedure to install the engine muffler.
