Remove the anti-cavitation valve (Item 1) [Figure 20-40-60] (Port E2) from the control valve for the tilt section.
Installation: Always use new O-rings and back-up washers. Tighten to 35-40 ft.-lbs. (47-54 Nm) torque.
Remove the lift lock solenoid (Item 1) [Figure 20-40-61] & [Figure 20-40-62] (Port F1).
Remove the anti-cavitation valve (Item 2) [Figure 20-40-61] & [Figure 20-40-62] (Port F1). from the control valve
for the lift section.
Remove the O-rings and back-up washer from the anti-cavitation valve [Figure 20-40-63].
