Remove the grease cover (Item 1) [Figure 30-50-11].
Remove the bolt (Item 1), the flat washer (Item 2), the retainer washer (Item 3), the spring washer (Item 4) and
the second retainer washer (Item 3) from the pulley assembly (Item 5) [Figure 30-50-12].
Remove the two pins (Item 1) from the hub assembly (Item 2) [Figure 30-50-13] only if they have been
damaged.
Remove the bracket assembly (Item 3) by tapping on the shaft (Item 4) [Figure 30-50-13] with a plastic hammer.
Remove the spring (Item 1) from the bracket (Item 2) [Figure 30-50-14].
