NOTE: The steering shaft can be removed without removing the control panel from the loader. Photo [Figure 50-ย ย ย ย ย ย ย ย ย ย ย 110-2] shows the control panel removed for clarity purpose only.
Remove the steering linkage mounting bolts (Item 3) [Figure 50-110-1].
Remove the steering shock mounting nuts (Item 2) [Figure 50-110-1].
Remove the steering shaft pivot bolt (Item 1) [Figure 50-110-2] from both sides of the control panel.
Installation: Tighten the pivot bolts to 180-200 in.-lbs. (21-23 Nm) torque.
Remove the steering shaft from the control panel.
